Botbitz – 10a Brushed ESC


Out of stock

SKU: BB10aESC Category:


Ranglebox is the official UK/EU supplier for Botbitz, an Australian based robotics parts company. This is their smallest electronic speed controller (ESC), capable of handling an impressive 10 amps of continuous load despite its tiny size.

The Botbitz 10a ESC starts life as a generic single direction brushless speed controller. Botbitz modify these with custom firmware and hardware changes, converting them to brushed motor controllers. With their slim, lightweight design and uniquely low price, they are the #1 choice for high power brushed motor control.

-Motor type: Brushed
-Voltage range: 6 – 12V
-Current handling: 10a (30sec)
-Battery Eliminator Circuit (BEC): Yes
-Control: Fwd/Rev/Brake
-Dimensions in mm: 45L (+ wires) * 18.5W * 7.5H
-Weight: 9g (incl. wires)
-Wire type: High temp. flexible silicone
-Programmable: No

These ESCs are the ultimate in plug-and-play. In keeping with all modern hobby RC gear: The red and black 20awg wires are the ESC’s power-in, the red and yellow 20awg wires are the ESC’s output. The small three-pin connector (standard Futaba plug) is the radio control input which plugs into your radio set’s receiver. Be sure to connect the radio and power inputs in the correct polarity; reverse polarity may irreversibly damage your ESC and surrounding electronics.

Note – Botbitz 10a ESCs are insulated by a heat-shrink wrap, the colour of which may vary.

Product ID: BB10aESC

Additional information

Weight 0.025 kg